[marley]

OK have done that

[marley]

Hi again,

i have taken a few pics of the valve complete top, and bottom but don’t know how on this site.

Gone me Pete

[marley]

Hi all,

i have looked at all the information on the other site, but non refer to the fixing of the female part of the brass gland.

Because the male and female parts of the gland are seized together, i have had to remove them in there entirety, which brings me to the question of apart from the  small threaded part in the tank thickness, what tightens the female part in place  in the tank or is that it?, as when the male section is unscrewed  it will undo the already fixed female part.? Also is there supposed to be a small section of plastic pipe, protruding from the outlet.?

Something which cropped up while i was effecting the tank repair, i noticed 4 self tapping screws  protruding from the gas cabinet, on investigation, it was found that the regulator is screwed through the aluminium panel .When the tank is full, it expands slightly, and presses against the 4 screws, not the best arrangement i think you will agree

[marley]

Hi all,

thanks for the info, very helpful.

pete

[marley]

Hi again,

thanks  Barry, i will contact them by phone, and hopefully replace the damaged ones before my Greek trip

Gone me Pete

[marley]

Hi,

yes there are  (5) bed storage door, underfloor storage (rear), small sliding draw inside door.

Pete

[Author]

Posts